NOTES:

1. MATERIAL: LOW CARBOL.     HOT

    DIP ZINC-ALUMI NUM ALLOY AND CLEAR ALUMTNUM-RICH EPOXi COATTNG

2. tUBING MUST MEET OR. EXCEED THE PERFORMANCE REQUIRENENTS OF SAE J526， WSA-M21P26-A, ESA-MIA270-A,

    CHRYSLER MS-3235 名PS-8688AZ, AND GM124M (W/X. XX/X. X/AGE/V)

3. MATERIAL SPECIF ICATIONS (SAE. 1006/1008/10101

    C-0.087MAX/0.10% MAX10. 08-0.131

    Mn-0.45%MAX/0.50%MAX/0.30-0.60%

    p-0.030%MAX/0.030%MAX/0.030%KAX

    S-0.050%MAX/0.050XMAX/0.050%MAX

4. MECHANICAL PROPERTIES OF FINISHED TUBING

    TENSILE STRENGTH- 310 MPa MIN

    ELONGAT 1ON-25% MIN.

    HARDNESS-65 MAX (ROCKWELL 30T)

    YIELD STRENGTH (0.2% OFFSET) - 170 MPa MIN

5. MANUF ACTURERS CERTIF ICATION REQUIRED W1TH EACH LOT

6. IDENTIF ICATION: EACH. TUBE PACKAGE SHALL BE TAGGED

    WiTH_ ThE FOLLOWING INFORMAT ION:

    VENDOR NAME

    YH AMERICA PART NUNBER

    p .0. NUMBER

    L OT NUMBER

    QUANTITY iN METERS(D)

7. INSIDE_ WELD SEAM HEIGHT SHOULD BE HELD AT A MINUMUM CONS ISTENT

    WITH G00D WELDING PRACTICES

8. 0.D. Is NEASURED BY AVERAGING MAXIMUN AND MINIMUM MEASUREMENTS